Posts Tagged ‘Christmas’

DIY Glitter Monogram Ornament

I was doing some Christmas shopping the other day at the mall and I saw these cute glitter monogram ornaments — I thought they would be an easy thing to recreate at home. Speaking of Christmas shopping, I picked up a BUNCH of super cute Jonathan Adler stuff from JCPenney on clearance at 50-75% off today! I did buy myself a little something but got a few gifts for friends as well. I love that feeling when you get a great deal! Go get yourself something cute from his Happy Chic line at JCP before they’re all sold out!

monogram ornament

So this ornament. Super easy to do with just a few materials from the craft store. I bought these wood letters from Michaels at about $1.50 each. I used some Mod Podge, gold paint, and glitter that I already had on hand for a frugal but pretty project. These monogram ornaments would be a sweet host/hostess gift or pre-Christmas present too.

The cast of characters: Martha Stewart’s Specialty Finish in Vintage Gold from Home Depot (or any gold craft paint), Mod Podge, Glitter, a paintbrush (a 1/2″ chip brush works well), wooden letters, sandpaper, and a power drill.

IMG_5766

Drill a hole in the corner of the wooden letter using a power drill. Then sand the wood lightly to remove any rough spots.

IMG_5767

Paint a coat of gold paint on the wooden letter.

IMG_5768

Allow the paint to dry (about 30 minutes). Important: prop the wooden letter up on something so that the paint doesn’t make it stick to the paper. I used some…chocolate that I had lying around.

IMG_5769

When it’s dry (about 30 minutes) the paint is shiny and beautiful. But it only gets better.

IMG_5772

Paint on a thin, even layer of Mod Podge over the whole letter.

IMG_5773

Prop it up again on some chocolate 😉 so the Mod Podge doesn’t stick to the paper as it dries. Then sprinkle, sprinkle, sprinkle, glitter to your heart’s content.

IMG_5776

Try to cover the letter evenly. But don’t worry about any white parts that might still show through — the Mod Podge will dry clear, and the gold paint underneath will camouflage any thin areas. Let it dry until the Mod Podge is clear and dry (about an hour).

IMG_5779

Tap off any excess glitter (you can pour it back into the bottle of glitter for next time). Thread a ribbon or string through the hole and tie a loop (I find it helps to put a piece of tape on the end of the string before pushing it through the hole to help it go through without fraying). And you’re done!

IMG_5802

It’s a super easy project that requires next to no artistic skill! This DIY glitter monogram ornament takes very little hands-on time — you just need a safe place to put it as it dries. Make a few for your family and friends!

monogram ornament

 

Don’t forget to check out my other Christmas crafts!

Holiday Crafts

 

DIY Christmas Tree Skirt

Festive Holiday Wreath

Peace and Joy Banner

Have an awesome holiday season!

Sharing at SavvySouthernStyle and TheBlissfulBee!

Festive Holiday Wreath

It’s December! Which means it is time for peppermint hot chocolate, fuzzy slippers, twinkling lights, and cozifying! This is such a beautiful time of year with so much inspiration — I only wish we could capture that feeling of creativity throughout the rest of the year.

Our home is getting cozier and cozier. Last week we installed a heat pump to replace our 40+ year-old electric furnace, which means that now we have affordable heat for the winter! Chris has added rigid foam insulation to most of the exterior walls, which means that the heat stays inside MUCH more than before. We have our Christmas tree up and we’ve had a few wood-burning fires in the fireplace, and I’m starting to get serious with decorating and crafting! There’s less than a month till the big 24, so there’s lots to do!

IMG_5723

I made this simple wreath from a craft store grapevine wreath form, and some ribbon and shiny plastic balls from the dollar store. Anyone can make this wreath with some inexpensive materials, a glue gun, and an extra half-hour. I hung mine on top of a chalkboard that we have in our kitchen and wrote “Tis the Season” inside the wreath.

I love the earthy texture of the grapevine contrasting with the glamorous shiny ornaments. And I’m still in the midst of my love affair with navy =).

IMG_5724

Materials

Small grapevine wreath ($3)
Two colors ribbon, about 2 yrds each ($2)
Shiny plastic ornaments, mini and small sizes ($3)
Glue gun and glue

IMG_5721

1. Wrap the two ribbons around the wreath form, overlapping with each other. Secure ends on the back of the wreath where they won’t be seen, either by tying a knot or by gluing with the hot glue gun. Cut off excess ribbon.

2. Tie a bow with the two remaining pieces of overlapping ribbons (just a simple regular bow, nothing fancy). Hot glue it to the wreath form.

3. Snip off any hanging string from the ornaments and glue them on the wreath, arranging them as you see fit. It looks nice if you alternate using larger and smaller balls. You can remove any ornaments carefully by peeling off the glue after it has dried. When you’ve arranged the ornaments to your satisfaction, add extra glue to secure them.

4. Tie a loop of ribbon at the top of the wreath to hang it. Tadaa, you’re done!

You can use any extra ornaments on your tree and extra ribbon for tying up presents, so this project really comes in at less than the $8 upfront cost. Simple and easy, just the way I like it!

Check out these other holiday crafts!

Holiday Crafts

Peace and Joy Bunting

DIY Christmas Tree Skirt

What holiday crafts are you working on this December?

Sharing at SavvvySouthernStyle and TheBlissfulBee!

Simple Peace and Joy Banner

Are you in full-on Christmas mode yet? I know it’s not Thanksgiving yet, but well, as a Canadian my Thanksgiving came in October so I feel totally free to embrace Christmas in earnest.

IMG_5562

For some reason I haven’t been crafting much in the last couple of weeks. We’ve done a lot of other projects — painting the front door (pictures soon), installing a new furnace, insulating the house and sealing window frames, and spending time with family. Somehow crafting and decorating have gotten lost in the mix, which is why this project is awesome — it literally takes 15 minutes to do and is almost free.

IMG_5547

I just cut up a brown paper shopping bag (this one is from the GAP) into little two-tailed flags. I glued on some silver chipboard letters I got from the dollar bin at Target.

IMG_5563

Then I taped the flags to some red and white baker’s twine (also from the dollar bin at Target).

IMG_5575

And I used washi tape to hang up the banner in the foyer. (Boy I wish that thermostat wasn’t there.)

IMG_5569

Easy, peasy! Total budget: less than $2 (since I’ll be able to reuse the extra chipboard letters and baker’s twine).

Are you getting your holiday decorating on? What have you been crafting lately?

Sharing at TheBlissfulBee!

DIY Christmas Tree Skirt

DIY Xmas Tree Skirt

When I told a friend today that we had already put up our Christmas tree, she did a double-take. What, already? The truth is, I put up the tree so that I could take pictures of this holiday craft in action. But really, if you’re going to go to the trouble of putting up a Christmas tree, you might as well enjoy it, right?

I have never owned a Christmas tree skirt. Last year, I just draped a throw blanket around the base of my artificial tree, but this year I decided to plan ahead and make one.

diy tree skirt

I’ve never found a tree skirt that I like that is affordable — the ones at Walmart are too glitzy, and the ones I like at West Elm and C&B are upwards of $50 — so I decided to make my own. This was a surprisingly easy project, if you have a little experience with sewing. If you’re a beginner, you might want to leave off the pom pom trim, as that was the hardest thing to sew.

tree skirt pompoms

This tree skirt has ribbon ties that hold it together and pom pom trim. But you can of course customize it however you want. You might use a different kind of trim, or use Velcro instead of ribbon. I basically followed Design*Sponge’s excellent tutorial for making a basic tree skirt, but added the trim and the fleece backing.

Ok, let’s get started!

Materials:

Square of fabric (48″ to 60″ dia, depending on your tree)
Square of fleece fabric for backing
pom pom trim (enough for the circumference of the circle, pi x dia)
grosgrain ribbon in color of your choice (4 pieces of about 10″ each)
sewing machine & thread
pins
scissors
fabric marker or chalk (or just a pen)

First, I took a square of fabric big enough to cover my tree base, and folded it into quarters. I already had this plaid fabric, so it was free! I usually like more color but for Christmas I like traditional decorations, so this was perfect.

IMG_5474

Most tree skirts I saw in retail stores were between 46″ to 60″ wide. My tree is a 6.5′ artificial tree, which isn’t huge, so I made the diameter of my tree skirt about 48″. I made a makeshift compass using a thread, a pin, and a pen. I tied the thread to the pin and the other end to the pen. My thread was about a foot long. I stuck the pin into the folded corner like so:

IMG_5475

And traced a quarter circle on my fabric. See the faint green line?

IMG_5476

Then, I carefully cut through all 4 layers of fabric using sewing scissors. I unfolded the circle of fabric, and used the scissors to even out any jaggedy areas. Then, I used the circle to trace another circle onto my fleece backing (which was just an old blanket I had lying around) and cut it out.

Now we have to cut a hole in the middle of the circle for the tree trunk. I folded the circle into quarters again and used a bowl to trace a quarter circle on the fabric. Then I cut out the circle.

IMG_5481

I unfolded the circle half way (so it is folded in half), and cut along one of the straight folds.

IMG_5484

So now you have a two-sided circle of fabric with a hole in the middle and a straight cut from the center hole to the outside.

Make sure once again that the wrong sides of the fabric are together. If you’re using pom pom trim, fold back the top layer of fabric and pin the trim to the bottom layer, with the pom poms on the inside. Replace the top layer of fabric and pin it in place. So now, you have two layers of fabric with the pom pom trim sandwiched between.

IMG_5479

On the straight open edge, sandwich your ribbons with the long ends inside the fabric (I used 4 sections of approx 10″ long grosgrain ribbon). Pin them in place. When it is sewn it will look like this (short ends out, long ends in).

IMG_5485

Now, you just need to sew around the entire perimeter of the circle, as well as up and down the straight edges and the hole inside. Leave an approx 5″ hole through which you can turn the whole thing inside-out. Sorry, no pics of this step, I was concentrating on sewing. As you sew the edges, make sure you catch the edge of the trim which is sandwiched between the fabric layers. This is the most challenging part.

Then, turn the whole tree skirt inside out through the hole. You can sew the hole closed by hand, but I just folded the raw edges in and top-stitched it on my sewing machine (because I’m lazy like that).

Christmas Tree Skirt

 

If you were able to catch the edge of the trim as you sewed around the circle, the pom pom trim should now face out and be securely attached! It’s like magic.

I wish I had better progress pics, but it was hard enough just doing the sewing with a toddler constantly underfoot, much less take photos. If you’re having trouble understanding my instructions, the Design*Sponge tutorial is really helpful.

My tree isn’t decorated yet! That will be a fun family activity in the next few days. I’m excited to decorate for the holidays and to make a few more crafts for this season! As a young family we don’t have a lot of traditions yet, but I’m hoping to make holiday crafting one of them!

DIY Xmas Tree Skirt

Oh and my budget breakdown was this:

plaid fabric = already owned but it orig cost $1/yard at a discount fabric store, so about $1.50
fleece fabric = reused an old throw blanket I already owned, so $0
pom pom trim = used a coupon, about $6
ribbon = $1

So in all this tree skirt cost me about $8.50 to make! It would have cost almost nothing if I hadn’t bought the pom pom trim, but I like it! It looks like little snowballs!

Are you planning to DIY a tree skirt? How about any other decorations for the holidays? You might like these other holiday crafts!

Holiday Crafts

Festive Holiday Wreath

Simple Peace and Joy Banner

Happy Holidays everyone!

Sharing at TheBlissfulBee, TheIdeaRoom, TatertotsandJello and SavvySouthernStyle!

Related Posts Plugin for WordPress, Blogger...