Posts Tagged ‘bedroom’
Yay! I’m excited to be typing out this post today. I have been thinking about and dreaming about making this headboard for months, but it kept getting put on the backburner until finally we made it happen last week!
Check out the before…
The fresh gray stripes make the bed look more sophisticated and elegant but still fun (which is very important). I had to take off the floral print pillow shams though, as they were competing a little too much visually with the stripes. It was just a little too much to take in! So I’m planning to switch out the bedding for neutral colored bedding, but maybe with a little more texture to contrast with the stripes.
And the headboard was actually pretty easy to do. I love that this really trendy look is so easy to DIY, making it approachable for most of us.
First you cut a sheet of plywood the size of your headboard. We wanted a thicker, more substantial headboard, so we framed the back of the plywood out with 2×3’s.
Then we cut out our foam to fit (not pictured) and secured it with hot glue. We actually cannibalized an old foam mattress for our foam. However, because the foam was thicker (about 1.75″), it was quite heavy and didn’t stick to the plywood that well. We didn’t want to use spray adhesive because it is quite high in VOCs, and we didn’t want to be breathing it in. We later solved the problem of the slightly loose foam by doing some simple button tufting.
After sticking the foam on, we wrapped the whole thing with polyester batting and then the fabric.
I used 3 yards of Premier Prints Canopy Stripe Twill Storm. I wanted a vertical stripe though, instead of horizontal, so I cut the fabric in half and sewed it together right in the middle with a seam along one of the stripes. You can’t even tell it’s there =).
We used a staple gun (and when our staple gun gave out, a hammer stapler), and tapped in any loose staples with a hammer.
This is how I folded the corners:
I wrapped the extra folded fabric on the inside first and stapled that down…
Then I folded the fabric right along the corner for a nice square corner.
At this point we added some simple button tufting using a button kit from Joanns, an upholstery needle, and waxed button thread (or upholstery thread). I didn’t take pictures of this step but here’s a great tutorial. We put in just 10 buttons, and they worked great for keeping the foam tight and secure. The extra tightness also helped smooth out some of the wrinkles that I couldn’t iron out.
I’m really happy with the finished product! It makes me feel like I’m waking up in a hotel every day.
I also feel like it is true to my personal style, which also makes me happy. It’s fresh, contemporary, and unfussy, but still elegant… Or at least I like to think so, ha!
As for how it’s attached, it is hung on the wall with brackets but is also sitting on the bed frame behind the mattress.
For some reason, the stripes remind me of Montreal. Kind of French-Canadian chic…=)!
Now for the bedding… I’m thinking of just going with a neutral taupe. I realize I love color way too much…and it’s best for me to add it in small doses with accessories rather than the big pieces. I think a taupe duvet cover will be a nice canvas for printed pillows, throws, etc… What do you think?
Sharing at MissMustardSeed, TatertotsandJello, Remodelaholic, SavvySouthernStyle, TheBlissfulBee!
This week has been kind of exciting. Lots of thinking, researching, and discussing my professional future. Nothing has been decided for sure yet, but I’m starting to be ready for a new challenge and I’m getting pretty excited thinking about it.
Anyway, there was a little more progress on the bedroom makeover.
I DIY-ed a couple of glossy navy blue lamps to bring a little more navy to this space. As you may recall, it looked like this after I added some Greek Key trim to the curtains:
The current bedside lamps were a little small in scale and were getting a bit lost next to our king-size bed and generously-sized nightstands.
So I decided to make over a couple of trophy lamps that I had picked up from the Habitat Restore a while back. They were $5 each, new, and I’m pretty sure they were overstocked from Walmart.
There was nothing wrong with the oil-rubbed bronze finish but I wanted something less traditional and more fun in our bedroom.
I taped off the light sockets and cords and gave the lamps several light coats of navy blue spray paint.
Then I let the lamps cure in the garage for 2 weeks to ensure that the major part of the off-gassing occurred before we brought the lamps into our room.
I am really really happy with how they turned out. I think this is one of my favorite spray paint projects to date. It helps that I’m getting better at spraying lightly and evenly and I’ve learned not to spray paint on a windy day =).
The glossy navy finish actually makes these cheap lamps look way more expensive.
The lampshades are just $10 shades from IKEA but I’m thinking of adding some ribbon trim to the edges.
The new lamps are more appropriate in scale to the room (please ignore the crooked duvet!).
From run-of-the-mill to glossy and glam =). What do you think?
Sharing at Tinysidekick, TheBlissfulBee!
Yay I have an office chair!
Remember this handsome guy? I called him my grandpa chair:
I really wanted to keep him but sadly his arms didn’t fit under my newly refinished desk. But I really loved this guy’s midcentury features, the shiny leather next to the walnut wood, the tufted seat, and the fact that he was in AMAZING condition. Fortunately I was able to sell him for a decent price to someone who I think will appreciate his awesomeness. Now I imagine him living a comfortable life in hipsterland surrounded by his midcentury peers.
ANYWAY, back to my new chair. I couldn’t find a cute office chair that didn’t look too “office-y”. This office area is in our bedroom and we only use it for household stuff, so I didn’t want it to get too businesslike and potentially stressful. I ended up choosing the Lydia dining chair from World Market.
It’s a nice neutral steel gray in a lovely soft velvet so I think it’ll go well anywhere in the house if I decide to move it later. I’m going to make a more poppy, colorful cushion to go on it to bring in more color.
I like that it’s kind of a more feminine shape, which is kind of what I’m going for in the bedroom.
The nailhead trim makes it a little more interesting from the back, since that’s the first view when you enter the room.
There’s not too much going on on the desk right now, which is just how I like it.
Oh and you may have noticed the closet doors are back on after having been newly painted bright white. I need to get some cute knobs for them now.
This view is nice too:
I guess baby approves.
I’m actually really glad I was able to sell the old chair and use the money toward something that suited the space better. Oh, and the new chair was 15% off and I had a $10 reward that I used on it so that really helped to alleviate any buyer’s guilt too =).
The master bedroom slash office has been my pet project for the past month. It’s still far from done, but I’ve changed more in the last month than I have in the past year. It’s gratifying to get something done, right?
I’ve had plain white IKEA curtains up since we moved in. When we moved into this house (which has LOTS of windows), I just went with white curtains everywhere because 1) They’re cheap at IKEA, 2) I didn’t have to think about it too much, and 3) White goes with everything. White does get a little bland though, especially in this room where I don’t have anything up on the walls yet. So I decided to glam up the curtains a little bit with Greek key trim, inspired by this image from Pinterest.
Did you know that Greek key trim is expensive? Especially the 3″ wide trim I was looking at, especially enough to do 4 curtain panels? Then, I found this awesome post by Bethany at Dwellings by Devore and I found my solution! She simply ordered a few yards of Premier Prints’ Towers fabric, which has a Greek key-inspired pattern on it. She cut the fabric into strips, folded over the raw edges, and sewed them to the edges of her curtains. Genius!
I ordered 3 yards of navy Premier Prints fabric from Fabric.com (at just $8 a yard) and did just that. Tadaa!
The office area, which previously looked like this (with my newly refinished desk):
Now looks like this:
(I still need to put the closet door back on the wall to the right; please disregard that for now!)
The bland wall on this side of the room is livened up a little by the graphic trim, though much still remains to be done…
A headboard, for example, would be nice. (Psst, instructions for building the DIY king-size bed frame are here).
There’s a lot of projects coming up here. I’m switching out the small lamps for larger scale ones (another DIY), and I’m bringing in more navy accents to pick up on the curtain trim and that blue pillow. I’ve also ordered the fabric for the headboard…just need some time to make it now…
And some art or other decorative element above the bed. But definitely something simple. I like the spare, serene feeling in here and don’t want to lose it.
What do you think of my little budget Greek key trim update? An easy way to bring a graphic element into a room, right?
P.S. My love affair with navy blue shows no signs of abating…
Sharing at VintageRevivals, TheBlissfulBee, TinySidekick!
I love January. If only because I feel like I’ve gotten more done in the past 3 weeks than I have in the past 3 MONTHS! We’ve really been on a roll in terms of getting on projects that have been dragging on and finally finishing them up.
For example, this midcentury modern desk was given to us by Chris’ parents several months ago. I immediately loved the clean lines, but I wasn’t so keen on the scuffed and stained desktop.
I actually didn’t mind the blond wood finish but all these marks needed to go:
This desk is NOT solid wood, sadly. The desktop is a thin wood veneer. I thought that I could still sand the finish down so that I could re-stain it. It was a very delicate process. In retrospect I should have applied a stripping product to it first, but in my impatience I just started sanding away. I sanded down most of the stains and then applied Minwax Jacobean, a dark espresso stain. It hid most of the remaining stains.
Here’s the final product.
As you can see, on the drawers I ended up sanding through the veneer at certain points (the darker spots on the drawer fronts). The wood beneath took the stain darker. So it’s not perfect but I really don’t mind the dark spots. They just look more weathered.
I sanded the main body of the desk and I painted it with an oil-based primer (Zinsser Cover Stain) which in my opinion helps to cover bleed-through better than water based. Its superior sticking power also provides greater durability on an already-finished surface. Then I used Behr Alkyd paint (I can’t remember the color but it is very close to white) for a final two coats. And yes, you can put water-based paint over oil-based primer.
I love Alkyd paint for furniture applications. It’s the same paint I used on the kitchen table:
Water-based alkyd paint dries to a super hard finish just like oil paint but it’s less toxic and cleans up with water. It has better self-leveling properties than regular latex and goes on super smooth with a brush. It also doesn’t dry tacky like regular latex paints can. These paints are fairly new, but I think they will become more and more popular.
I finished the stained portions with oil-based polyurethane (applied with a brush). I love that stuff, even though it is super stinky (be sure to wear a ventilator rated to filter VOCs). It dries so smooth and glossy and is super durable.
So now the little office nook in the master bedroom is starting to take shape. The only problem is that this desk is quite small, and the AWESOME vintage office chair I picked up doesn’t fit under it very well:
I seriously love this chair and consider it one of my greatest estate sale finds. The faux leather is in PRISTINE condition, and the frame is made of a beautiful wood that looks like teak. The previous owner had it in the den and must not have sat there much. It doesn’t even need to be reupholstered. I wish it worked with the desk but the desk is just too small to accommodate those lovely curved arms. So either I sell the chair…or I change out the desk. And after all the work I just put into the desk, I’m a bit loath to get rid of it!
Oh first world problems…
Sharing at TwelveOEight, TheBlissfulBee, SavvySouthernStyle, TinySidekick, MissMustardSeed, Remodelaholic, TatertotsandJello!