When I told a friend today that we had already put up our Christmas tree, she did a double-take. What, already? The truth is, I put up the tree so that I could take pictures of this holiday craft in action. But really, if you’re going to go to the trouble of putting up a Christmas tree, you might as well enjoy it, right?
I have never owned a Christmas tree skirt. Last year, I just draped a throw blanket around the base of my artificial tree, but this year I decided to plan ahead and make one.
I’ve never found a tree skirt that I like that is affordable — the ones at Walmart are too glitzy, and the ones I like at West Elm and C&B are upwards of $50 — so I decided to make my own. This was a surprisingly easy project, if you have a little experience with sewing. If you’re a beginner, you might want to leave off the pom pom trim, as that was the hardest thing to sew.
This tree skirt has ribbon ties that hold it together and pom pom trim. But you can of course customize it however you want. You might use a different kind of trim, or use Velcro instead of ribbon. I basically followed Design*Sponge’s excellent tutorial for making a basic tree skirt, but added the trim and the fleece backing.
Ok, let’s get started!
Square of fabric (48″ to 60″ dia, depending on your tree)
Square of fleece fabric for backing
pom pom trim (enough for the circumference of the circle, pi x dia)
grosgrain ribbon in color of your choice (4 pieces of about 10″ each)
sewing machine & thread
fabric marker or chalk (or just a pen)
First, I took a square of fabric big enough to cover my tree base, and folded it into quarters. I already had this plaid fabric, so it was free! I usually like more color but for Christmas I like traditional decorations, so this was perfect.
Most tree skirts I saw in retail stores were between 46″ to 60″ wide. My tree is a 6.5′ artificial tree, which isn’t huge, so I made the diameter of my tree skirt about 48″. I made a makeshift compass using a thread, a pin, and a pen. I tied the thread to the pin and the other end to the pen. My thread was about a foot long. I stuck the pin into the folded corner like so:
And traced a quarter circle on my fabric. See the faint green line?
Then, I carefully cut through all 4 layers of fabric using sewing scissors. I unfolded the circle of fabric, and used the scissors to even out any jaggedy areas. Then, I used the circle to trace another circle onto my fleece backing (which was just an old blanket I had lying around) and cut it out.
Now we have to cut a hole in the middle of the circle for the tree trunk. I folded the circle into quarters again and used a bowl to trace a quarter circle on the fabric. Then I cut out the circle.
I unfolded the circle half way (so it is folded in half), and cut along one of the straight folds.
So now you have a two-sided circle of fabric with a hole in the middle and a straight cut from the center hole to the outside.
Make sure once again that the wrong sides of the fabric are together. If you’re using pom pom trim, fold back the top layer of fabric and pin the trim to the bottom layer, with the pom poms on the inside. Replace the top layer of fabric and pin it in place. So now, you have two layers of fabric with the pom pom trim sandwiched between.
On the straight open edge, sandwich your ribbons with the long ends inside the fabric (I used 4 sections of approx 10″ long grosgrain ribbon). Pin them in place. When it is sewn it will look like this (short ends out, long ends in).
Now, you just need to sew around the entire perimeter of the circle, as well as up and down the straight edges and the hole inside. Leave an approx 5″ hole through which you can turn the whole thing inside-out. Sorry, no pics of this step, I was concentrating on sewing. As you sew the edges, make sure you catch the edge of the trim which is sandwiched between the fabric layers. This is the most challenging part.
Then, turn the whole tree skirt inside out through the hole. You can sew the hole closed by hand, but I just folded the raw edges in and top-stitched it on my sewing machine (because I’m lazy like that).
If you were able to catch the edge of the trim as you sewed around the circle, the pom pom trim should now face out and be securely attached! It’s like magic.
I wish I had better progress pics, but it was hard enough just doing the sewing with a toddler constantly underfoot, much less take photos. If you’re having trouble understanding my instructions, the Design*Sponge tutorial is really helpful.
My tree isn’t decorated yet! That will be a fun family activity in the next few days. I’m excited to decorate for the holidays and to make a few more crafts for this season! As a young family we don’t have a lot of traditions yet, but I’m hoping to make holiday crafting one of them!
Oh and my budget breakdown was this:
plaid fabric = already owned but it orig cost $1/yard at a discount fabric store, so about $1.50
fleece fabric = reused an old throw blanket I already owned, so $0
pom pom trim = used a coupon, about $6
ribbon = $1
So in all this tree skirt cost me about $8.50 to make! It would have cost almost nothing if I hadn’t bought the pom pom trim, but I like it! It looks like little snowballs!
Are you planning to DIY a tree skirt? How about any other decorations for the holidays? You might like these other holiday crafts!
Festive Holiday Wreath
Simple Peace and Joy Banner
Happy Holidays everyone!
Sharing at TheBlissfulBee, TheIdeaRoom, TatertotsandJello and SavvySouthernStyle!