Category: Crafts

Festive Holiday Wreath

It’s December! Which means it is time for peppermint hot chocolate, fuzzy slippers, twinkling lights, and cozifying! This is such a beautiful time of year with so much inspiration — I only wish we could capture that feeling of creativity throughout the rest of the year.

Our home is getting cozier and cozier. Last week we installed a heat pump to replace our 40+ year-old electric furnace, which means that now we have affordable heat for the winter! Chris has added rigid foam insulation to most of the exterior walls, which means that the heat stays inside MUCH more than before. We have our Christmas tree up and we’ve had a few wood-burning fires in the fireplace, and I’m starting to get serious with decorating and crafting! There’s less than a month till the big 24, so there’s lots to do!

IMG_5723

I made this simple wreath from a craft store grapevine wreath form, and some ribbon and shiny plastic balls from the dollar store. Anyone can make this wreath with some inexpensive materials, a glue gun, and an extra half-hour. I hung mine on top of a chalkboard that we have in our kitchen and wrote “Tis the Season” inside the wreath.

I love the earthy texture of the grapevine contrasting with the glamorous shiny ornaments. And I’m still in the midst of my love affair with navy =).

IMG_5724

Materials

Small grapevine wreath ($3)
Two colors ribbon, about 2 yrds each ($2)
Shiny plastic ornaments, mini and small sizes ($3)
Glue gun and glue

IMG_5721

1. Wrap the two ribbons around the wreath form, overlapping with each other. Secure ends on the back of the wreath where they won’t be seen, either by tying a knot or by gluing with the hot glue gun. Cut off excess ribbon.

2. Tie a bow with the two remaining pieces of overlapping ribbons (just a simple regular bow, nothing fancy). Hot glue it to the wreath form.

3. Snip off any hanging string from the ornaments and glue them on the wreath, arranging them as you see fit. It looks nice if you alternate using larger and smaller balls. You can remove any ornaments carefully by peeling off the glue after it has dried. When you’ve arranged the ornaments to your satisfaction, add extra glue to secure them.

4. Tie a loop of ribbon at the top of the wreath to hang it. Tadaa, you’re done!

You can use any extra ornaments on your tree and extra ribbon for tying up presents, so this project really comes in at less than the $8 upfront cost. Simple and easy, just the way I like it!

Check out these other holiday crafts!

Holiday Crafts

Peace and Joy Bunting

DIY Christmas Tree Skirt

What holiday crafts are you working on this December?

Sharing at SavvvySouthernStyle and TheBlissfulBee!

Simple Peace and Joy Banner

Are you in full-on Christmas mode yet? I know it’s not Thanksgiving yet, but well, as a Canadian my Thanksgiving came in October so I feel totally free to embrace Christmas in earnest.

IMG_5562

For some reason I haven’t been crafting much in the last couple of weeks. We’ve done a lot of other projects — painting the front door (pictures soon), installing a new furnace, insulating the house and sealing window frames, and spending time with family. Somehow crafting and decorating have gotten lost in the mix, which is why this project is awesome — it literally takes 15 minutes to do and is almost free.

IMG_5547

I just cut up a brown paper shopping bag (this one is from the GAP) into little two-tailed flags. I glued on some silver chipboard letters I got from the dollar bin at Target.

IMG_5563

Then I taped the flags to some red and white baker’s twine (also from the dollar bin at Target).

IMG_5575

And I used washi tape to hang up the banner in the foyer. (Boy I wish that thermostat wasn’t there.)

IMG_5569

Easy, peasy! Total budget: less than $2 (since I’ll be able to reuse the extra chipboard letters and baker’s twine).

Are you getting your holiday decorating on? What have you been crafting lately?

Sharing at TheBlissfulBee!

DIY Christmas Tree Skirt

DIY Xmas Tree Skirt

When I told a friend today that we had already put up our Christmas tree, she did a double-take. What, already? The truth is, I put up the tree so that I could take pictures of this holiday craft in action. But really, if you’re going to go to the trouble of putting up a Christmas tree, you might as well enjoy it, right?

I have never owned a Christmas tree skirt. Last year, I just draped a throw blanket around the base of my artificial tree, but this year I decided to plan ahead and make one.

diy tree skirt

I’ve never found a tree skirt that I like that is affordable — the ones at Walmart are too glitzy, and the ones I like at West Elm and C&B are upwards of $50 — so I decided to make my own. This was a surprisingly easy project, if you have a little experience with sewing. If you’re a beginner, you might want to leave off the pom pom trim, as that was the hardest thing to sew.

tree skirt pompoms

This tree skirt has ribbon ties that hold it together and pom pom trim. But you can of course customize it however you want. You might use a different kind of trim, or use Velcro instead of ribbon. I basically followed Design*Sponge’s excellent tutorial for making a basic tree skirt, but added the trim and the fleece backing.

Ok, let’s get started!

Materials:

Square of fabric (48″ to 60″ dia, depending on your tree)
Square of fleece fabric for backing
pom pom trim (enough for the circumference of the circle, pi x dia)
grosgrain ribbon in color of your choice (4 pieces of about 10″ each)
sewing machine & thread
pins
scissors
fabric marker or chalk (or just a pen)

First, I took a square of fabric big enough to cover my tree base, and folded it into quarters. I already had this plaid fabric, so it was free! I usually like more color but for Christmas I like traditional decorations, so this was perfect.

IMG_5474

Most tree skirts I saw in retail stores were between 46″ to 60″ wide. My tree is a 6.5′ artificial tree, which isn’t huge, so I made the diameter of my tree skirt about 48″. I made a makeshift compass using a thread, a pin, and a pen. I tied the thread to the pin and the other end to the pen. My thread was about a foot long. I stuck the pin into the folded corner like so:

IMG_5475

And traced a quarter circle on my fabric. See the faint green line?

IMG_5476

Then, I carefully cut through all 4 layers of fabric using sewing scissors. I unfolded the circle of fabric, and used the scissors to even out any jaggedy areas. Then, I used the circle to trace another circle onto my fleece backing (which was just an old blanket I had lying around) and cut it out.

Now we have to cut a hole in the middle of the circle for the tree trunk. I folded the circle into quarters again and used a bowl to trace a quarter circle on the fabric. Then I cut out the circle.

IMG_5481

I unfolded the circle half way (so it is folded in half), and cut along one of the straight folds.

IMG_5484

So now you have a two-sided circle of fabric with a hole in the middle and a straight cut from the center hole to the outside.

Make sure once again that the wrong sides of the fabric are together. If you’re using pom pom trim, fold back the top layer of fabric and pin the trim to the bottom layer, with the pom poms on the inside. Replace the top layer of fabric and pin it in place. So now, you have two layers of fabric with the pom pom trim sandwiched between.

IMG_5479

On the straight open edge, sandwich your ribbons with the long ends inside the fabric (I used 4 sections of approx 10″ long grosgrain ribbon). Pin them in place. When it is sewn it will look like this (short ends out, long ends in).

IMG_5485

Now, you just need to sew around the entire perimeter of the circle, as well as up and down the straight edges and the hole inside. Leave an approx 5″ hole through which you can turn the whole thing inside-out. Sorry, no pics of this step, I was concentrating on sewing. As you sew the edges, make sure you catch the edge of the trim which is sandwiched between the fabric layers. This is the most challenging part.

Then, turn the whole tree skirt inside out through the hole. You can sew the hole closed by hand, but I just folded the raw edges in and top-stitched it on my sewing machine (because I’m lazy like that).

Christmas Tree Skirt

 

If you were able to catch the edge of the trim as you sewed around the circle, the pom pom trim should now face out and be securely attached! It’s like magic.

I wish I had better progress pics, but it was hard enough just doing the sewing with a toddler constantly underfoot, much less take photos. If you’re having trouble understanding my instructions, the Design*Sponge tutorial is really helpful.

My tree isn’t decorated yet! That will be a fun family activity in the next few days. I’m excited to decorate for the holidays and to make a few more crafts for this season! As a young family we don’t have a lot of traditions yet, but I’m hoping to make holiday crafting one of them!

DIY Xmas Tree Skirt

Oh and my budget breakdown was this:

plaid fabric = already owned but it orig cost $1/yard at a discount fabric store, so about $1.50
fleece fabric = reused an old throw blanket I already owned, so $0
pom pom trim = used a coupon, about $6
ribbon = $1

So in all this tree skirt cost me about $8.50 to make! It would have cost almost nothing if I hadn’t bought the pom pom trim, but I like it! It looks like little snowballs!

Are you planning to DIY a tree skirt? How about any other decorations for the holidays? You might like these other holiday crafts!

Holiday Crafts

Festive Holiday Wreath

Simple Peace and Joy Banner

Happy Holidays everyone!

Sharing at TheBlissfulBee, TheIdeaRoom, TatertotsandJello and SavvySouthernStyle!

Spraypainted $1 Candleholders

gold owls

On Tuesday I went to Target…one of my favorite activities. Our local outdoor mall has a Target attached and I go there probably 2x a week with Baby Brownie because it’s a great place to walk with the stroller as well as get milk, cereal, necessities, etc… There’s a little outdoor playground right outside Target which makes for a nice break with the toddler.

Anyway, I ALWAYS look in the dollar bins at Target to see what goodies they have. This week I wasn’t disappointed as I found these cute little metal candleholders.

IMG_5334

I grabbed the owls but they also had turkeys and jack-0-lanterns. I thought the owls were the cutest though, and they’re more all-season. I don’t like buying a lot of seasonal decorations because our 1970s home just doesn’t have that much storage! And I feel like seasonal stuff can cross over the line into tackiness pretty easily. So I just try to get stuff that’s appropriate around the year.

IMG_5343

I just sprayed these $1 candle holders with Valspar gold spray paint. I still had most of a can left over from another project, so for 2 candle holders this little project just cost me $2!

They were all right before, but now they’re really cute!

gold owls

I actually kind of messed these up because it started raining while I was spraying them and a few raindrops got on the paint before I was able to bring them inside. It hasn’t rained in 9 months but of course, there’s a downpour on the day I’m spraypainting outside (Southern California, boo hoo, haha). But I was glad that the plants got some watering though, and with the brush fires recently we really need rain.

Anyway the raindrops weren’t really noticeable on the gold paint. I thought the owls were cute before but they look much more expensive now and the gold acts as a neutral, so they go with anything! I have them on my dining table along with my pumpkin centerpiece and my mercury glass candle holders. These would be super cute little gifts too.

WARNING: I was reading about the flammability of spray paint. The wet paint is VERY flammable but when it is dry, it is just like any other painted surface. So wait until the paint is dry and cured (48 hours) before using the candle holder, and as always, NEVER leave a candle burning unattended.

Linking up at Place of my Taste, Remodelaholic and Savvy Southern Style

DIY Travel Felt Board

My toddler and I are planning a trip to see my folks in Toronto pretty soon. It’s about a 5 hour flight, but we have a layover in Chicago for about an hour and a half. I’m thinking, the layover is probably a good thing so Baby Brownie can run around and work out her excess energy. But I’m still dreading the flight.

Now that she loves to run around and play, Baby Brownie can’t sit still for long…especially not in my lap (we didn’t buy her a seat). And she loves to get into trouble and play with stuff she shouldn’t be messing with. Other moms I’ve talked to say to bring lots and lots of activities to keep her busy, so I’ve been putting together a bag full of travel activities. New toys, crayons, stickers, books… and I saw this awesome idea for a DIY felt board so I made one to bring along.

diy travel felt board

I got this idea from a friend who got it from a blog but I can’t for the life of me find that blog again!!! So I’m very very sorry if I stole your idea. Just let me know and I’ll give you the credit!

Also, this felt board is NO SEW, which makes it really easy.

Materials:

Various colors of craft felt, including at least two (2) 8.5 x 11″ pieces.
Scissors
Fabric glue
Batting

felt board stuffing

I decided to stuff my felt board with batting to stiffen it a little but still keep it soft and plush and foldable. I just cut a rectangle of polyester batting a little smaller than my two 8.5 x 11″ pieces of felt, sandwiched it between the felt, and glued the edges of the felt with a bead of fabric glue.

felt board house

The rest was super simple. I just cut out some triangles, rectangles, and squares to make a house. I cut out other shapes to make a sun, moon, star, cloud, and tree. The components of the tree and the sun are glued together to make it easier for my daughter to recognize. The grass is glued down too. Everything else is loose so she can place them wherever she wants. When I have time I want to make a little cat and dog too.

felt board face bald

For the other side of the felt board I cut out a head shape (yes it’s silly-looking, but Baby Brownie doesn’t care) and eyes, nose, mouth, and eyebrows. The components of the eyes are glued together.

felt board face

Also, this silly bowl haircut. When I have time I’m going to make other versions of mouth, eyes, hair (maybe with yarn glued on) so she can change it up.

Everything fits really nicely into a large freezer bag, and it’s lightweight so it’s ideal for bringing traveling. You can make all sorts of scenes…your imagination’s the limit! I might also make a barnyard scene with animals, although animals are quite a bit harder to cut out than simple geometric shapes.

Any tips for traveling with toddlers? Any must-bring toys? Any advice would be appreciated!

Related Posts Plugin for WordPress, Blogger...